News & Entertainment Archive

EIA: New Jersey Electricity Prices Among Most Expensive Nationwide

An electricity billResidents in New Jersey pay the sixth most expensive rate for electricity at 16.3 cents per kilowatt-hour (kWh), which is higher than the nationwide average of 12 cents per kWh, according to the Energy Information Administration (EIA).

The U.S. average referred to an average household’s monthly consumption of 908 kWh. Based on EIA’s statistics, many homes in the U.S. have used more smart meters since 2010.

State Electricity Rates

Hawaii’s per-kWh charges ranked as the least affordable at an estimated 33 cents, which equated to a monthly bill of more than $300 for a typical household. On the other hand, residents in Idaho pay the most affordable rate at around eight center per kWh, or an estimated $73 per month.

EIA energy economist Tyler Hodge said that Idaho’s low rate mostly stems from its use of hydroelectric dams to generate power, while the high crude oil prices in Hawaii influence the steep amount. New York and Connecticut residents pay the second most expensive rate at 18.1 cents per kWh, followed by 17.5 cents per kWh in Alaska and 16.5 cents per kWh in New Hampshire.

Smart Metering

Americans have installed around 71 million smart meters in their homes by the end of last year, according to the EIA. This represented around 47% of the 150 million consumers in the U.S.

Aside from smart metering, one way to monitor your electric usage involves making sure your heating and ventilation appliances are in good condition, as you may discover that you need air conditioning repair. In Gloucester, New Jersey, and other parts of the state, this is important since malfunctioning appliances tend to use more power.


Many factors influence the rate of electric consumption for each home. The number of people living in a house serves as one factor. On the other hand, households should take note that appliances should be in tip-top shape to make sure they are not consuming more power than necessary.

Create a Safer Workplace

Office workplaceSafety is one of the most important things employers must ensure in the workplace. The office or the workstations must not endanger lives. For companies that want to prioritize people’s safety, the following can make the workplace more employee-friendly:

Develop a safety program

If a company’s processes allow employees to be exposed to health hazards, a safety program development from a company like Sheffield Safety and Loss Control could identify possible gaps and save lives. You should discuss with your management and staff how to manage and resolve safety gaps to improve productivity and workers’ safety.

Train staff on proper safety methods

No matter how effective the safety methods are, you will still need to train employees to ensure that they follow safety rules and regulations. Get employees to undergo training and understand the company’s safety measures.

Put safety reminders in proper places

It’s best to place visual reminders in the right places, so employees are reminded of them right before they do the required task. These visual reminders are a good way to ensure that every employee understands and knows the measures.

Implement rewards programs

Employees, teams, and departments that always follow the safety measures can be rewarded in some way so that they will be more motivated to comply. Creating a rewards program improves motivation and encourages individual employees to follow company standards.

Have random compliance checks

If the company administration wants to ensure that the employees and departments are implementing the safety measures, they should make random checks on the compliance. These random checks ensure that everyone follows these rules strictly.

Ensuring the safety of employees makes sense not only financially but also because of practicality. Work-related injuries will affect the reputation and productivity of the company, and it’s to everyone’s advantage if safety measures are in place.

The Different Types of Headstones and Its Features

Headstone with a crown of flowers hangingGrave markers typically list the name, date of birth and death of the person who died. It will primarily depend on the wishes of the deceased or their immediate family if they want to include an epitaph, images or personal information on the headstones here in Salt Lake City.


These headstones typically come in a variety of styles, such as:

  • Ledgers that generally lie flat on the ground, cover the grave and are eight inches thick. The family can choose to put up a monument at its head or engrave it and use it as the headstone itself.
  • Most people know monuments as headstones, which are tablets that stand straight out of the ground.
  • Pillow stones or slant markers commonly sit flat on the ground and are around 18 inches tall. It has a wedge shape because its front is angled back.
  • Flat markers or grass markers are those found at the head of the grave, lie flat on the ground and are even with the grass.
  • Bevel markers also lie flat on the ground, but they rise above the grass and are around eight inches thick.


They make a majority of headstones from bronze, granite or the combination of both. Granite varies in color from black to brown to gray to pink. Engraving usually comes in a series of styles and typefaces. 

Monument headstones are available in several various styles and shape that range from common rectangles to complex sculptures. Meanwhile, flat markers can be completely flat or have flower vases built in it.

Most cemeteries promote buying a headstone from them or their recommended vendors. If you do buy from an online retailer or a third party, ask the cemetery first if this is possible. You also need to double check with them if they will charge you fees for installing a headstone that you did not buy from them.

Retroreflective Materials: A Must for Road and Industrial Safety

Truck accident on the roadLow-light conditions, found in places such as warehouses, factories or on roads at night benefit greatly from using retroreflective materials.

Retroreflective materials are a type of material with a highly reflective surface that seems to glow brightly or appear to light up when it is hit by light. Retroreflective clothing and signs are required on the road and in other hazardous workplaces by law.

Where You Can Find Retroreflective Markings

Retroreflective materials can be found everywhere. One example is conspicuity tape, such as the ones offered by, can come in a wide number of colours and reflect light onto oncoming traffic. These reflectors can also be seen on high visibility clothing, on street signs and roadside equipment.

They can also be used to mark walkways, roads, ledges and low hanging objects and structures. The primary purpose of retroreflective markings is to increase the visibility of an object to prevent collisions. Reflective tape is proven to reduce car crashes.

It even works on the wildlife — in Norway, the government applied reflective collars and antler tags on the reindeer to prevent car crashes. They saw a drastic reduction in crashes, keeping both the wildlife and drivers safe.

How Retroreflective Materials Work

Retroreflective materials achieve their distinctive glow through a prismatic effect. Tiny crystalline structures in the materials catch the light and refract it so that it bounces back to the onlooker without losing its intensity.

The material’s surface can either contain small prisms or microscopic beads. Both types can effectively reflect light back.

The advantage of retroreflective materials is that they seem to light up without the need for a power source. They are also waterproof and can be used outdoors without losing reflectivity. This makes them the ideal choice for safety applications on the road and in the workplace.

3 Factors to Consider When Choosing Kindergarten Furniture

Children listening to their teacher during a reading session In any teaching environment, the corresponding atmosphere is always known as the second teacher. Particularly in kindergarten, the types of chairs and tables that the kids use can have a huge effect on their comfort and concentration span. Therefore, it is more than critical to choose the right kindergarten furniture. Use the following checklist when making this decision.

1. Mobility

A kindergarten environment comprises of diverse teaching styles, which require kids moving from one side of the classroom to another. Therefore, built-in furniture is not ideal for such an environment. The chairs should be light enough for the kids to carry around. These should be soft with no sharp edges, so they won’t get hurt as they move around.

2. Correct Sizing

There has been a rise in the number of musculoskeletal disorders amongst kids. These conditions develop from the fact that kids sit on adult-sized furniture. This is why it’s best to use seating that has the appropriate height, one that promotes a good sitting posture. This ensures that the kids spend more time learning than paying attention to the discomfort of their chairs. Having adjustable seats is also a good choice.

3. Health and Safety

Health is a key factor to consider when choosing furniture. Good furniture should have low levels of volatile organic compounds (VOCs). You wouldn’t like to send the kids home after they get sick due to furniture related issues. Also, the furniture to be used should not break easily. This precaution will prevent cases of bodily harm on the kids in case they fall. It will also prevent cases where kids might choke on pieces of plastic that break off from their tables.

It is every parents’ joy when their kids come home having learned something new. For this to happen, it is imperative for you to provide the right environment for effective learning in terms of the correct type and quality of furniture. The checklist above is a step forward in achieving this.

NZ Government Assures Safety of Cladding in Apartments

Modern Cladding SystemThe New Zealand government assured the public that cladding systems remain safe for apartments, despite fire-related incidents abroad.

In London, faulty building materials allegedly caused the 24-story Grenfell Tower to be in flames. Those that worry about their homes catching fire can heave a sigh of relief since the New Zealand government banned the use of these materials on January 1.

Flammable Cladding?

Flammable claddings in apartment buildings are uncommon in New Zealand, according to Building and Construction Minister Nick Smith. Still, the government is not taking any chances, as it required councils nationwide to find out if there are any faulty materials used in their areas before the ban.

In May, several proposals aim to enhance fire safety regulations for high-rise buildings. These measures included stricter verification for cladding systems and improving accessibility for water supply and fire hydrants.

For now, businesses should only transact with domestic companies that provide products and services designed and developed in New Zealand.

Local Expertise

When searching for reputable cladding providers, look for those vouched by the Building Research Association of New Zealand (BRANZ) such as Nu-Wall Aluminium Cladding. The company uses local supplies in manufacturing its cladding systems before shipping them to construction projects worldwide.

In this way, you can be sure that these products went through screening by New Zealand’s quality standards. Nu-Wall combined different elements in creating their cladding solutions, taking aesthetics, weather-resistance and functionality into account.

BRANZ has appraised the company for three times, which makes it a good choice for residential and commercial building projects.

While concerns have spread over the safety of cladding systems, New Zealand has stringent safety measures for applying these materials to its buildings. Many local companies adhere to these guidelines not just to retain customers, but also to maintain their reputation as industry leaders.